• Other Seaward Sites:

DO7e micro ohmmeter

DO7e micro ohmmeter

Technical Specifications

The DO7e is a practical low cost microhmmeter for low resistance measurement, ideal for use in the workshop, field or test facilities. This micro ohmmeter is of rugged construction, contained in a sealed ABS plastic case with lid and carrying handle.

The DO7e microhmmeter has many advanced features, including protection up to 415 volts rms at the measuring terminals, digital calibration and long scale length, 6000 count. The measuring ranges may be automatically or manually selected. Rechargeable batteries means real portability with more than 1 hour of continuous operation on the lowest ranges, and 20 hours on all others. Automatic Power Off ensures maximum battery life. The internal charger will boost charge to 90% of full charge, switching automatically to a trickle maintenance charge. Warning LEDs illuminate when an open circuit lead condition is detected.

The DO7e microhmmeter is supplied ready for use with batteries, mains cord and test leads, no extras are normally necessary. For special lead sets we offer a variety of different styles which are listed on the accessories page, together with calibration standards.

Customer Comments

No comments have been made about this product. Be the first to let us know what you think.

Knowledge Base

You must be registered to view Knowledge Base articles related to this product. Please register or log-in to view these articles.

Key Features

  • True 4 wire measurement eliminates lead resistance
  • 6 push button ranges 60 milliohms to 600 ohms
  • Resolution 1 microhm on 60 milliohm range
  • Auto ranging
  • 10 Amp measuring current on lowest range
  • 0.8' LED Display daylight viewable
  • Input protection up to 415 Volts rms
  • forward and reverse current measurement
  • Auto average of forward and reverse measurement
  • Auto power off
  • Mains / rechargeable battery operation
  • Ditgital calibration pass code protected

Downloads

Please feel free to download any of the documents associated with this product.

Technical Specification

Measurement 4 Terminal Kelvin/Thomson principle eliminates error due to lead resistance. Open circuit measurement voltage~5V dc
Display 0.8" LED 6000 count with automatic decimal point and polarity indication.
Ranges 6 push button or auto selected with LED indication.
Calibration Digital, security code protected.
Protection 415 rms maximum at input terminals.
Battery Sealed lead acid, rechargeable cell gives a minimum of 1 hour of continuous measurement on the lowest 10 amp ranges and 20 hours on all other ranges. Internal charger with battery state indicator.
Terminals 6mm binding posts accept spade tags and 4mm banana plugs.
Working Temp 0...40°C rel. humidity 80% max. non-condensing
Storage Temp -20...+50°C.
Mains Supply 10/230 Volts +10% -10% 47Þ63Hz 20VA
Safety EN 61010-1
EMC Complies with EN61326
Dimensions 343 x 327 x 152 mm (W D H) approx.
Mass 6 kg approx.
Accessories Supplied complete with mains cord, measuring leads with Kelvin Clips, handbook, and calibration certificate.

 

Resistance Ranges

Product Matrix

The Product Matrix allows you to compare the features of up to 5 products. Simply check the box next to the products you wish to compare then select the 'Compare Products' button.

Product Enquiry

Contact Information

indicates required field
Title*
Please type in the validation code from the image (case sensitive).

Additional Information (optional)

 
Site engineered by NorthBloc   
© 2009, Seaward Electronic Group Ltd. All rights reserved.
Range Resolution Typical Current Accuracy @ 20°C ±5 °C, 1 year Temperature Coefficient / °C

600 Ohm

100 mOhm

1 mA

±(0.25% Rdg +0.05% FS)

40 ppm Rdg + 30 ppm FS

60 Ohm

10 mOhm

10 mA

±(0.25% Rdg +0.05% FS)

40 ppm Rdg + 30 ppm FS